 |
|
Portable inhaler
INHALET A, INHALET B The Inhalet inhaler is a lightweight,
portable inhaling apparatus. It is intended for use in outpatients'
clinics, health centers, clinics and at the patient's home.
 The
inhaler has an in-built, two-stage membrane compressor with an inlet
filter and nebulizer mask. The apparatus is very easy to use.
The compressed air is forced through a tube into the spray nozzle,
where the liquid medicine is dispersed into a small droplets which
penetrate through the opening of the mask in the form of mist. The
size of the droplets depends on the nebulizer used. The nebulizer
mask and connecting tube must be sterilized or disinfected after
use.
Apparatus is made according to IEC-601-1.
| TECHNICAL
DATA |
INHALET A/B |
| Compressor capacity |
8,6 l/min |
| Maximum positive
pressure |
do 2,8 bar |
| Supply voltage |
230
V, 50 Hz, 30 W |
| Dimensions (length
x width x height) |
230
x 220 x 180 mm |
| Weight of set |
3,2
kg |
| Inlet filter |
FI-01 |
| Operation time setting |
INHALET
A - not available
INHALET B - 0 do 15 min |
| Nebulizer |
*RI-01
ali ** Microneb |
| Diameter of droplets |
RI-01: 0,5 do 10 µm
Microneb: 0,5 do 2 µm |
| Medicine consumption |
RI-01: 0,2 ml/min
Microneb: 0,15 ml/min |
* For multiple use. Sterilization is compulsory.
** Disposable filter. Multiple use is possible only when used on
one person. Filter must be disinfected after each use.
We reserve the right to technical changes.
|
|
|
